Premium Kegerator Beer Fridge Pack, 160 L, Fits Four 19 L Kegs, MKX CO2 Regulator

The Premium kegerator fridge pack is the cabinet and the gas gear, ready for you to choose the font that suits your bar. Inside the 160 L interior there is room for four 19 L (5 gallon) ball lock kegs, or one 50 L commercial keg, and the benchtop is drilled for a standard font with plugs fitted in the meantime.

Anything that can go in a keg can go on tap here, from beer and cider through to wine, premixed drinks, soda water, kombucha and espresso martinis. The fridge pack includes an MKX regulator for CO2 dispensing, so the gas side of the system arrives sorted.

Low profile rollers are built in for moving the cabinet into place and can be swapped for castors, the door is reversible, a font fan with speed control keeps the tower cold, and an internal light helps when checking keg connections.

Features

• Holds up to four 19 L ball lock kegs or one 50 L commercial keg
• 160 L internal volume
• Fridge pack including an MKX CO2 regulator
• Benchtop drilled for a standard font, with plugs fitted for unused holes
• Built in low profile rollers, removable and upgradeable to castors
• Reversible door that can be oriented either way
• Font fan with speed control
• Internal light for inspecting keg connections
• Suitable for free standing or under counter installation
• No setback required at the sides, top, front or underneath

Specifications

• Type: Kegerator beer fridge pack
• Internal volume: 160 L
• Keg capacity: 4 x 19 L ball lock kegs or 1 x 50 L commercial keg
• Height: 830 mm without rollers, 850 mm with rollers, 890 mm with castors
• Width: 610 mm
• Depth: 660 mm
• Internal dimensions: 724.9 mm H x 511.9 mm W x 405.1 mm D
• Packaged dimensions: 88 cm H x 66 cm W x 69 cm D
• Weight: 43 kg
• Power: 220 to 240 V, 50 Hz
• Climate class: T
• Refrigerant: R600a, 40 g charge as stated by the supplier
• Insulation: Cyclopentane

Package Contents

• 1 x Premium kegerator cabinet
• 1 x MKX CO2 regulator
• 1 x Set of benchtop hole plugs
• 1 x Instruction manual

The supplier advises leaving 5 to 10 cm at the rear for airflow, elevating the cabinet off the floor so moisture can dissipate, and not enclosing it in an unvented cabinet. Benchtop guard rails and stainless steel benchtops are sold separately.